Description
Viecar ELM327 OBD2 V1.5 BT4.0-Wireless ELM 327 V 1 5 Scanner PIC18F25K80 ODB2 For Android/IOS OBD 2 OBD2 Car Diagnostic Auto tool
Note：Acrylic box/Carton Viecar ELM327 V1.5 According to customer feedback, this product is compatible for Carista（Software）
Customers Feedback：★★★★★
1.Fast delivery
2.High-quality packaging and quality
3.Many functions, support most cars on the market
Purchase Notes!!!
Some customers have feedback that our products will not connect when they connect to IOS via BT-Wireless in the Setting of phone,please Remember the connection method，because the BT4.0-Wireless connection is different from normal BT-Wireless when Viecar connect IOS
1.Open the BT-Wireless firstBut please do not connect the product to the setting BT-Wireless page of your phone,this way is wrong！！！
2.Open the softwarelike AUTO Doctor
3.Choose Extras，then click Connectivity ，chooseBT-Wireless，and click Device,choose Viecar BLE
4.Connect BT-Wireless in theConnectivity ，then close the software or refresh software,open software again,then connect to the car again
Software features:
Software can perform the following operations:
Read error diagn
ostic codes – General and manufacturers special use, and display their meaning
Database has over 3000 generic code definitions
Clear the error code and shut off the MIL Check Engine light
Display current sensor data, comprising:
Engine revolutions p
er minute RPM
The calculated load value
Coolant temperature
Fuel System Status
Speed
Short-term fuel situation
Long-term fuel situation
Intake manifold pressure
Injection advance time
Intake air temperature
Air flow rate
Absolute throttle position
Oxygen-sensing voltage associated with the short-term fuel state
Fuel System Status
The fuel pressure
Fuel consumption monitoring and many other data ……
Future software features:
Data chart display and logging
Freeze frame data
Continuous and discontinuous oxygen probe results
and more…
Supports OBDII protocols:
SAE J1850 PWM 41.6 Kbaud
SAE J1850 VPW 10.4 Kbaud
ISO 9141-2 5 baud init, 10.4 Kbaud
ISO14230-4 KWP 5 baud init, 10.4 Kbaud
ISO14230-4 KWP fast init, 10.4 Kbaud
ISO15765-4 CAN 11bit ID, 500 Kbaud
ISO15765-4 CAN 29bit ID, 500 Kbaud
ISO15765-4 CAN 11bit ID, 250 Kbaud
ISO15765-4 CAN 29bit ID, 250 Kbaud
Product Parameters for Viecar V1.5：
1.Communication method:
BT4.0-Wireless
2.Software platform: Support for
Android / IOS
3.Operating voltage: 9V~16V
4.Operating current: 45mA
5.Operating temperature: -40 C~85℃ C
6.Operating humidity: <60
7.Dimensions: 45mm x 40mm x 18mm
8.Supported vehicle: OBDII protocol vehicle
Viecar BT4.0-Wireless is no longer simply a screen information display system, but through stunning
head-up display HUD：
Let drivers no longer have to bow to watch the meter, while enjoying the pilot driving experience, and eliminating the potential safety problems from bowing to watch meter. Cool real-time dashboard design, extended original car without display data; very largely enhance the visual experience.
1 X Viecar Scanner
1 X User Manual
Reviews
There are no reviews yet.