Additional information
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Amplifier |
Brand Name | ALLOYSEED |
Origin | Mainland China |
Certification | NONE |
40.70 $
14994 in stock
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Amplifier |
Brand Name | ALLOYSEED |
Origin | Mainland China |
Certification | NONE |
Description:
1. The TP5100 is a switching step-down dual section 8.4v/single section 4.2v lithium battery charging management chip. Its QFN16 subcompact package and simple peripheral circuits make the TP5100 ideal for high-current charging management applications in portable devices.
2. Meanwhile,TP5100 has built-in input overcurrent, undervoltage protection, chip overtemperature protection, short-circuit protection, battery temperature monitoring and battery reverse connection protection.
3. The TP5100 has a wide input voltage of 5v-18v, and the battery charging is divided into three stages: trickle precharging, constant current and constant voltage. The trickle precharging current and constant current charging current are adjusted by external electric Yang, and the maximum charging current reaches 2A.
4. The TP5100 uses a switch mode with a ton rate of 400kHz, allowing it to use smaller peripherals and retain less heat during high current charging.
5. TP5100 built-in power PMOSFET, anti-inverse concentration circuit, so no need to prevent backflow schottky diode and other peripheral protection.
Feature:
1. Built-in power MOSFET, switching mode, less heating, simple peripheral.
2. Programmable charging current, 0.1A –2A.
3. Programmable precharge current, 10–100.
4. There is no need to connect and reverse schottky diodes.
5. Wide working voltage up to 18V.
6. Red and green LED charging status indicator.
7. Chip temperature protection, overcurrent protection, undervoltage protection.
8. Battery temperature protection, battery reverse shutdown, short circuit protection.
9. Switch frequency 400KHz, available inductance 20uH and above.
10. PWR _0N- power and battery switching control.
11. Accuracy of charging voltage control less than 1.
12. Steady flow, constant flow and constant voltage charge to protect the battery.
Application:
Portable equipment, various chargers.
Smartphones, pdas, cell phones.
MP4, MP5 player, tablet.
Model aircraft.
Electric tools.
Intercom.
Specification:
Product size: 25mm x 16mm x 5mm/0.98 x 0.62 x 0.19
Package weight: 4g
Absolute maximum rating:
Static input voltage VIN: 20V
BAT: – 8. 4V ~ 20V
BAT short circuit duration: continuous
Maximum junction temperature: 120℃
Working environment temperature range: -40℃-85℃
Storage temperature range: -65℃ -125℃
Pin temperature welding time 10 seconds: 260℃
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 X TP5100 Charging Circuit Board
If you are not sure about the model of the board, please send us a clear picture of the original board. Have a nice day! ! Welcome to my shop. If you have any problems, please contact me and I will try my best to satisfy you. We specialize in T-con boards and other electronic products. We have our own factory and a large number of T-con boards and power boards for sale. Please contact me what model you want [...]
83.05 $ Add to cartSupport Dropshipping and Wholesaling. 100 Original and Good Quality with Free After-sale Warranty. 1. It's high Amp item, and the device needs certified and professional electrician for wiring.2.The frequency of the wireless router is 2.4GHz.3. The meter requires the measured device must have neutral wire. otherwise it can't measure the device's voltage, current, and power.Material: plasticcolour: As shownPackage Contents:1 x 3 Phase WiFi Energy KWH Meter80A/1 x 3 Phase WiFi Energy KWH Meter120AOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a [...]
135.00 $ Add to cartmost hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
61.24 $ Add to cartTTGO LORA32 868/915Mhz 433MHz SX1276 ESP32 Oled-display BT Wireless WIFI Lora development board Adapter Board Features: 1.The antenna needs to be in connection with the IPEX interface if the antenna is not connected, the signal reception will be unstable 2.Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of the battery, otherwise it will be damaged! 3.With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin 4.Support for Sniffer software protocol analysis, Station, [...]
85.51 $ Add to cartFeatures ● infrared resolution: 120 × ninety● temperature measurement range: - 20 ~ 400 ℃● temperature measurement mode: center point, high and low temperature tracking● photo storage: 16GB TF Card● high and low temperature alarm: image, beep, LED flashing● laser indication / LED lighting● three prevention design: IP54 / two meter fall prevention● PC analysis software● six palette options● adjustable emissivity● the service time shall not be less than 9 hours● 3.7v/2600mah rechargeable lithium battery● bottom design ¼ Screw holes can be used with tripod Uti120s detailed description 1. WORLDWIDE SHIPPING.Except some countries and APO/FPO2. Orders processed timely after [...]
282.00 $ Add to cartProgrammable Eight Decade Resistor Board 1R-9999999R Step Accuracy 0.1R 1/2 Watt SMD Resistance Module Description: This is resistance substitution box good low-cost alternative solution with good accuracy, wide range and 0.1R step accuracy. for educational experiments, electronic engineering design or test trimming are excellent applications. Can flexible and quick setting resistance range from 1R to 9999999R or 0.1-9.9999999MR 0-10MS . Feature: Design based on resistors series theorem. 1/2 watt tolerance +/-1 SMD resistors. High quality FR4 glass fiber PCB. With spare parts 8 pieces jumper caps Specification: Programmable Resistance: 0 to 9,999,999 ohm, [...]
42.54 $ Add to cart85774 Ratón y teclado KSD301 250V 10A 95 °C Cierre Normal NC temperatura controlada interruptor termostatoAltavoz OOTDTY Descripción:100 nuevo y de alta calidadAmpliamente utilizado para control de temperatura o protección de electrodomésticos eléctricos.Se cierra hasta que la superficie alcanza los 95 grados Celsius, luego el interruptor se abre.Propósito, reinicio automático, bajo costo, gran capacidad, termostatos de corriente electrodomésticos, PC, hornos de microondas, planchas, refrigeradores, horno electrónico, unidad de calefacción, café, calentador de agua, etc.Tipo de acción: Cierre Normal N.C.Temperatura de acción: 95 Â 250V 10AResistencia de circuito 50 MohmResistencia de aislamiento 100 MohmTamaño: 3,3x2,1 cm/1,3 pulgadas x 0,8 [...]
41.68 $ Add to cartADAU1701/1401 is a complete single-chip audio system with built-in control interfaces for 28 / 56-bit audio DSP, ADC, DAC, and similar microcontrollers. Signal processing technologies including equalization, crossover, bass enhancement, multi-band dynamic processing, delay compensation, speaker compensation, and stereo image widening can be used to make up for the practical limitations of speakers, amplifiers, and listening environments, thereby significantly improving the sound quality experience. This signal processing technology is comparable to that used in high-end studio equipment. Most processing is done in full 56-bit double-precision mode, resulting in excellent low-level signal performance. The ADAU1401 is a fully programmable DSP. With [...]
71.96 $ Add to cartHW-882 2S 3A 18650 Li-ion Lithium Battery Charger Protection Board BMS Module 7.4V 8.4V Feature: 2S 7.4V/8.4V 18650 lithium battery protection board, suitable for protecting two rechargeable li-ion/lithium polymer batteries in series from overcharge and overdischarge. Specification: Charging voltage: 8.4V-9V Maximum working current: 3A Maximum instantaneous current: 5A Quiescent current: less than 3uA Internal resistance: less than 45mΩ Over-discharge voltage range: 2.3-3.0V ±0.05V Overcharge voltage range: 4.25-4.35V ±0.05V Short circuit protection: it can be protected and needs to be recharged Product size: 36 x 6 x 2mm Product weight: 3g Packing size: 50 x [...]
40.59 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.