Additional information
Certification | CE / EU |
---|---|
Feature | Stocked |
Type | Kitchen Lighters |
Origin | Mainland China |
Model Number | CN1 |
Material | Plastic |
Plastic Type | Melamine |
140.00 $
50 in stock
Certification | CE / EU |
---|---|
Feature | Stocked |
Type | Kitchen Lighters |
Origin | Mainland China |
Model Number | CN1 |
Material | Plastic |
Plastic Type | Melamine |
Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V
3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 600W
5, ignition output: AC220V, power is not more than 100W
6, electromagnetic pump / valve output: AC220V, power is not more than 100W
7, circulating water pump output: AC220V, power is not more than 1000W Wiring instructions
1. Brown-blue black sheathed wire: Connected to 220V AC power supply, the leakage circuit breaker and a bipolar switch should be installed at the front end of the power supply to play the role of reliable control of the total power supply and safety protection. 2, red-black white sheathed wire: plug the fan.
3. Brown-blue black sheathed wire with cold-pressed round female insert: plug in electromagnetic pump/solenoid valve.
4. Black sheathed cable with black combination connector: plug the 220V igniter.
5. Small black sheathed wire brown-blue temperature sensor wire.
6. Red-black black sheathed wire with cold-pressed round male connector: The red wire is connected to the fire needle, and the black wire is connected to the burning ground of the burner.
7. Brown-blue black sheathed wire with cold-pressed flat female insert: circulating water pump. Automatic mode operation and job description
After power-on, press the combustion start/stop button to start in the oFF state. After starting, it will start to burn according to the current temperature less than the starting temperature. When the temperature is higher than the stop temperature, the combustion will stop. The starting sequence is -> pre-fan cleaning-> ignition-> oil pump 1-> Detecting flame-> After 10 seconds, open the oil pump 2. During the intermediate process, no fire is detected. After the automatic ignition for 10 seconds, if the flame is not detected, the error will be reported. Turn off the ignition, oil pump, and fan after cleaning 10; After the normal shutdown or when the stop temperature is reached, the combustion is turned off and the fan is cleaned. Timed On Reservation Mode Operating Instructions
After power-on, press the display time button in the oFF state, the timing indicator flashes, the time indicator light is always on, and the hour and minute digital tube displays 00,00. If you need to set the time, you need to enable it in the non-zero state. Zero state 5 seconds automatically start or manually press the time button to quickly start; when the setting is out of time, you can set the required time by pressing the hour or minute plus or minus button. The time countdown returns to 00,00 to start the system.
Cancel the reservation mode operation: Press the display time button in the display time state to cancel the current setting mode. timed off time mode operation instructions
Press the display time button in the working state, the timing indicator flashes, the time indicator light is always on, the hour and minute digital tube displays 00,00, if you need to set the time, you need to be in the non-zero state to enable, in the non-zero state for 5 seconds. Automatic start or manual press the time button to quickly start; when the setting is out of time, you can set the required time by pressing the hour or minute plus or minus button. When the time counts back to 00,00, the system is turned off.
Cancel time mode operation: Press the display time button in the display time state to cancel the current setting mode.
Control the combustion temperature setting operation instructions
Press the display temperature button in the working state or the reservation mode or time mode, the display temperature indicator is always on, the start temperature can be adjusted according to the increase or decrease of the start temperature, and the stop temperature can be adjusted according to the increase or decrease of the stop temperature; The set value can be confirmed, and it is automatically confirmed without pressing for 5 seconds. System parameter setting description
The following instructions are all performed when the controller's settings are in the factory state and the controller is powered on. Whether other interfaces are connected or not connected does not affect the setting operation.
After the controller is powered on, all the digital tubes and LED indicators will be lighted up. You can use this opportunity to check whether there are any missing or missing lights. Finally, the digital tube displays OFF, which is the shutdown state.
Press the start/stop button in the power off state, and the system enters the working state.
1. Modify the system parameters: Press and hold the setting button for about 3 seconds, and the red digital tube displays HEn.
★ Parameter confirmation save: adjust the parameters, press and hold the setting button, the number starts to flash until the red display SAU, indicating that the parameter is saved successfully, and the system exits the setting state.
★ Press the Set button to enter HEn, odH, oNF, oFF, obt, and set the parameters as described above. Finally, press and hold the Set button until SAU is displayed, and all parameters are saved before the one-time completion.
★If the above operation does not long press the setting button and display SAU, the new parameters will not be officially saved. If there is no operation for a few seconds or the system is started by pressing the start/stop button, the system will still run according to the original parameters.
1 HEn menu is the fire detection option; default value: 1; setting range: 0-1.
★Parameter meaning: 1 is to enable the fire detection function, 0 is to turn off the fire detection function, and the work process does not check the fire.
2 odH menu is the continuous ignition time option; default value: 12; setting range: 0-20 seconds.
★Parameter meaning: After the electromagnetic pump is working, the ignition output will stop after the corresponding time.
3 The oNF menu is the pre-cleaning option; the default value is 10; the setting range is 0-20 seconds.
★ The meaning of the parameter is: cleaning before starting the ignition.
4 The oFF menu is the post-cleaning option; the default value is 10; the setting range is 0-20.
★ The meaning of the parameter is: clean after turning off the fire.
5 The obt menu is the temperature option for the circulating water pump; default value: 35; setting range: 35-80 seconds.
★The meaning of the parameter is: when the water temperature is greater than or equal to this temperature, the circulating water pump is turned on less than the circulating water pump. Fault description: E-1: pseudo fire E-2: Ignition failure E-3: Unexpected flameout E-4: Open temperature line E-5: Thermal line short circuit
More than 95 of the ovens are suitable for this igniter. Check the parameter fan voltage 220V, solenoid valve voltage 24V, solenoid valve is 12V can also be used You can use this igniter! Features: used in gas water heaters, gas ovens applicable to New South, Dewey, Hongling, Honglian, Henglian, Mingtai, Bao, Xiangxing, Debao, Baozhu, Kitchen Po, Lijia, Nanguo Baoli Gas ovens, etc., with automatic ignition and fault alarm function, adopt American PIC chip, have stable performance, strong anti-interference ability, high reliability, safety and stability, and convenient system design. The pulse igniter is a gas oven control system, which [...]
68.13 $ Add to cartMain function description of commercial steam boiler ignition controller: First, the product features: 1, working voltage: 175V-245VAC 2, with water level detection, water shortage protection. 3, with wind pressure switch safety protection control fan, if no wind pressure switch, the wind pressure switch line is short-circuited. 4, with pseudo-fire, residual fire safety protection 5, with accidental flameout safety protection. 6, with a fault alarm prompt function. 7, control a 3V [...]
71.25 $ Add to cartLabel change notice: GM103 is changed to SHRN322 First, the wiring instructions: N: ignition output S: Signal detection Green: Power 220 volts Blue: power sharing line Orange/Blue: PV gas solenoid valve Red/blue: L2 combustion work indicator White/blue: L1 flameout ignition indicator Yellow/blue: siren Black: ground wire Second, the function: Size: 127mm x 70mm x 42mm Mounting hole distance: 118mm aperture φ 5mm Weight: 400g Input voltage: AC220 AC185~AC250V Ignition: output high voltage above 16KV Re-ignition: automatic ignition after flameout Indicator light: flameout ignition indication, combustion work indication, automatic exchange Automatic alarm: Exceeding the ignition time 22 seconds, it will automatically [...]
83.75 $ Add to cartZQ1 alcohol based fuel steam controller system description First, the configuration: 220V electromagnetic pump; 220V fan; super ignition; start button compatible switch; wind pressure switch; lower water level probe; ignition needle; fire needle; status indicator. Second, the applicable products: Alcohol based fuel steam generator Third, the work process: When the start button is turned on, the fan runs immediately. When the wind pressure switch is turned on, the ignition starts and the 220V electromagnetic pump is started, and the alcohol-based fuel is sprayed. When the fire detector detects the flame controller, the ignition is stopped, and the system enters the [...]
96.25 $ Add to cartGN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the [...]
358.75 $ Add to cartGN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the [...]
402.50 $ Add to cartGN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the [...]
402.50 $ Add to cartPortable Electric Arc Lighter USB Rechargeable Windproof Electronic Lighter Eco-friendly Aromatherapy for Candles Gas Stoves Feature: 1.Windproof and Flameless Technology: The Arc lighter adopt windproof design and flameless plasma technology to protect the electric pulse from being blown out by strong wind or wet weather. 2.Safty Protection: Its so much easier to light candles with this than traditional butane lighters or matches. A safety lock design keeps children away from fire. The long and flexible soft head allows you to keep a safe distance from sparks. 3.USB Charging: The lighter uses a lithium [...]
Quick-loading alcohol base oil and oil linkage frying stove controller function description The controller is a moisture-proof structure of the whole plastic case, and has its own lead-out line. It is used for electric heating and alcohol-free atomizing stove without fan. In addition to the functions of conventional fan, ignition output, electromagnetic pump gear output, etc., there are also 5 files. The key oil and oil linkage makes the matching of the air volume and the oil volume of each gear in the best, and the fast 5 gear and the rocker switch realize the effect of no need to [...]
196.25 $ Add to cartN series atomization controller description This series of controllers is used in conjunction with a methanol spray burner for ignition and fire regulation. With the extinguishing function, it can be used in places such as steaming furnaces. System parameter setting method: Press and hold the setting button to enter the system parameter setting, turn the knob to select the desired menu, press the setting button to display the value, turn the knob to adjust the value, and then press and hold the setting button until the SAU is displayed, indicating that the saving is successful. Note: If you do not [...]
177.50 $ Add to cartFirst, the methanol no fan electric furnace head intelligent controller detailed description The controller is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition, electromagnetic pump speed regulation, etc., it can also expand external precision regulator to achieve precise adjustment of oil pump flow and Start-stop control, this function and gear position adjustment achieve the effect of no need to switch, fire with heart, start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear [...]
92.50 $ Add to cartBasic parameters of DQ8B commercial stove super igniter The DQ8B super igniter developed and produced by our company is an AC220V igniter, which can ignite cigarettes within 1 second, with stable and reliable performance and high ignition efficiency. Widely used in commercial equipment such as hotel energy-saving stoves, boilers, burners, steam cabinets, ovens, etc. fueled by diesel, gasoline, alcohol, biofuels, and various industrial oils. Since it was launched on the market in 2010, it has been widely loved by customers, and now customers are all over the Pearl River Delta and the whole country. 1. Product model: DQ8B. 2. Main [...]
83.75 $ Add to cartGN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the [...]
358.75 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.