Additional information
Display Type | Digital Only |
---|---|
Model Number | Kaiweets HT206D |
DIY Supplies | ELECTRICAL |
Brand Name | KAIWEETS |
Certification | CE, EAC, RoHS |
Origin | Mainland China |
97.59 $
191 in stock
Display Type | Digital Only |
---|---|
Model Number | Kaiweets HT206D |
DIY Supplies | ELECTRICAL |
Brand Name | KAIWEETS |
Certification | CE, EAC, RoHS |
Origin | Mainland China |
EU Fasend Store – From Europe, Fast Send.
Kaiweets HT206D Digital Clamp Meter True RMS 6000 Counts
Highlights
True-RMS clamp meter:
This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads.
LowZ & LPF:
Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter LPF for accurate measurement of variable frequency drive signals when measuring motors and transformers. To measure the current, you need to clamp the meter around one of the wires and not the whole power cord.
NCV Detection Function:
Non-contact voltage detection effectively check electrical status by through measuring EM field intensity without touching any wires.
Multi-function:
Two-color backlit LCD Display – When the voltage is> 80V, the current is > 3A, the LCD backlit screen turns red to warn you of high voltage.
Multi-Function
Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.
Z/F Button Measurement
Press the Z/F button to switch the respective secondary function between the different measurements, such as between AC and DC.
If current> 3A, the orange display lights up.
The measuring range of AC current is 60A/600A. Accuracy: ±2.5+5.
NCV Detection Function
Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
Automatic Shutdown
If there is no operation in 15 minutes, the meter will beep 3 times, indicating for Auto Power Off; with, with no further operation in 30 seconds, the meter beeps again and automatically shuts down.
Temperature Measurement
Range: -4°F~1832°F
The K-type thermocouple included
Specifications
DC Voltage: 600mV/6V/60V/600V
AC Voltage: 6V/60V/600V
DC Current: 60A/600A
AC Current: 60A/600A
Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ
Capacitance: 10nF/100nF/1mF/10mF/100mF/1mF/ 10mF/100mF
Package Contents
1 x HT206D Digital Clamp Meter,
1 x Test Leads Pair,
1 x ThermocouplesPair,
2 x AAA batteries,
1 x User Manual,
1 x Carrying Bag.
EU Fasend Store – From Europe, Fast Send.
You can get from us:
1, High quality product;
2, 3-10 working days fast delivery service;
3, One year worry-free warranty;
4, Discount for repeat purchase;
…
Buy now to experience more!
Not support ship to ES/PT islands address.
Features: USB power tester can measure USB charging voltage, current and discharge capacity over time.OOTDTY USB power tester has designed with reset button, and you can press 3-5 seconds to make the screen cleared.Can easily measure the operating current of the output voltage of the USB port and equipment.Small size , no power , and other ancillary equipment, plug and play also detect USB charger output voltage and current are standard suitable for factories, Laboratory and users.Can be used to check the performance of USB cables, wall chargers, car chargers and power banks.Specification: Material: ABSSize: Input / Output [...]
44.93 $ Add to cart6Pcs Super Small 3W+3W Type D Digital Audio Amplifier Power Amp Module 2.5V-5.5V Features: 1. PAM8403 mini type D digital power amplifier can be easily put in small space of many digital products, high amplification efficiency.2. It can be powered by computer USB 5V, or phone charger 5V, or lithium battery.3. High efficiency 90, can provide 3W left channel+3W right channel when using 4Ω load and 5V power supply.4. Type D power amplifier has very high amplification efficiency, sound quality will not be effected by temperature rise, no need of heat sink.5. Build-in noise reduction circuit, no noise when power [...]
43.51 $ Add to cartKeyestudio STEM 4DOF Robot Arm Kit Mechanical Arm Claw Kit PS2 Control for Arduino Robot Arm Kit DIY Programming Robot Tutorial : How to DIY a robotic arm to complete multiple movements? Cool.With this keyestudio robotic arm kit, you are able to DIY your own controllable mechanical arm using ARDUINO microcontroller. It uses REV4 and 2 JoyStick modules to control the angle degree of 4 servos.When DIY this 4DOF robot arm kit, you could get everything needed for arm installation and debugging. There are 3 controlling methods are as follows:1 Controlling through Wired JoyStick included in the kit;2 [...]
116.30 $ Add to cartANENG ST181 Digital Clamp Meter DC/AC Current 4000 Counts Multimeter Ammeter Voltage Tester Car Amp Hz Capacitance NCV Ohm Test Features: Can measure AC/DC voltage, AC current, resistance and test continuity.Manual select measurement function and range.Overload protection for the whole measurement range.LCD display with backlight, convenient to operate and read.Data hold function, low battery indication, auto power off.Suitable for electrical equipment testing and maintenance. Specifications: Model ST181 Display 4000 counts Range Accuracy AC voltage 4V/40V/400V/600V ±1.5+3 DC voltage ±1.0+3 Resistance 400/4k/40k/400k/4M omh ±1.2+3 40M omh ±1.5+5 AC current 40A/400A ±2.5+3 [...]
57.96 $ Add to cartUT210 Series Mini Clamp Meters UT210 series mini digital clamp meter is with high reliability, high security, automatic range, miniaturization. Can accurately measure small current signals; product chip set up VFC start mode, the internal will go through a specific filter circuit, the high-frequency interference signal filtered out to ensure the accuracy of the measurement data! Can be applied to the occasion with VFC frequency conversion voltage, current, full-range overload protection and unique appearance design, making it a new generation of practical electrical measuring instruments with more excellent performance. Features 1.AC DC Current measurement3.LCD buzzer5.VFC [...]
122.74 $ Add to cartbody { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
65.31 $ Add to cartmodname=ckeditor Features: -100 brand new and premium - Pocket hole fixtures can quickly and accurately determine the location of pin corners, edges or surface joints. - Wear-resistant metal bushings ensure precise alignment when drilling holes;The adjustable fence can accurately position the pin to achieve maximum joint strength. - Able to make edge-to-edge, T and edge-to-corner connections. - Industrial plastic with high impact resistance, sturdiness, durability and durability. Specification: Type:Jig for drilling colour: yellow, blue Material: ABS size: 20.5x7.5x5.5cm weight:0.17kg Package Contents: 1 x Locator Only the above package [...]
54.08 $ Add to cartUV Light Fast Heat Dissipation AC85‑265V Resin Curing Light for 3D Printer Feature: 1. Professional Light: Ultraviolet light source, up to 6W power consumption, this light is a professional UV light for many professional uses.2. Aluminum Alloy Material: The main body of this light is made of thickened die casting aluminum alloy material, with fine heat dissipation and long service life.3. Easy Using: This resin curing light is easy to use, plug and play, which can greatly improve your working efficiency!4. Easy Carrying: Comes with a small size and lightweight as well, this resin curing light is easy [...]
71.50 $ Add to cart1 Set Useful High Strength Wear-Resistant Automatic Screw Chain Nail Adapter Drill Chain Set for Carpentry Specifications: Such chain nail adapter is connected to work fast and penetrate strongly, nails can be fast, continuous and stable, more convenient operation and improve working efficiency. It can feed nails automatically without nail jamming. Screw of different lengths need to choose the corresponding nozzle length, which can be adjusted by turning the button, and the depth of the screw can also be adjusted. With this automatic chain nail adapter, you can use it to nail wood panels, cabinets, ceilings, etc. It is made [...]
73.75 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.