Additional information
Model Number | INA226 |
---|---|
DIY Supplies | ELECTRICAL |
Brand Name | GREATZT TZ |
Origin | Mainland China |
Certification | NONE |
Functions | Electronic Module |
Range of application | Switch And Sensor For Arduino STM |
44.19 $
99961 in stock
Model Number | INA226 |
---|---|
DIY Supplies | ELECTRICAL |
Brand Name | GREATZT TZ |
Origin | Mainland China |
Certification | NONE |
Functions | Electronic Module |
Range of application | Switch And Sensor For Arduino STM |
Description
The INA226 is a current shunt and power monitor with an I2C™- or SMBUS-compatible interface. Thedevice monitors both a shunt voltage drop and bussupply voltage. Programmable calibration value,conversion times, and averaging, combined with aninternal multiplier, enable direct readouts of current inamperes and power in watts.
The INA226 senses current on common-mode bus voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device operates from a single 2.7-V to 5.5-V supply, drawing a typical of 330μA of supply current. The device is specified over the operating temperature range between –40°C and125°C and features up to 16 programmable addresses on the I2C-compatible interface
Features
Senses Bus Voltages From 0 V to 36 V
• High-Side or Low-Side Sensing
• Reports Current, Voltage, and Power
• High Accuracy:
– 0.1 Gain Error Max
– 10 μV Offset Max
• Configurable Averaging Options
• 16 Programmable Addresses
• Operates from 2.7-V to 5.5-V Power Supply
• 10-Pin, DGS VSSOP Package
Applications
• Servers
• Telecom Equipment
• Computing
• Power Management
• Battery Chargers
• Power Supplies
• Test Equipme
Pin Description
VBUS: bus voltage input
SDA/SCL: IIC bus data and clock signal lines
ALERT: Multi-function alarm output
A0/A1: IIC address line
IN+/IN-: non-inverting analog input, inverting analog input
1/2pcs Billing Meter Digital Display Multifunctional Billing Sockets High-resolution Intelligent Biller for Electrical Equipment Feature: 1. Real-time Monitoring: The measuring socket supports the measurement of parameters such as voltage, current, accumulated electricity, accumulated electricity bills, and current. 2. Only Two Function Buttons: Mode and up. The function interface is concise and clear, easy to understand and adjust. There is a reset hole in the middle. If you need to reprogram, just insert a paper clip into this hole. 3. High-resolution Digital Display with Backlight: The backlight can always be turned on or off after a delay of [...]
45.64 $ Add to cart1/2pcs Billing Meter Digital Display Multifunctional Billing Sockets High-resolution Intelligent Biller for Electrical Equipment Feature: 1. Real-time Monitoring: The measuring socket supports the measurement of parameters such as voltage, current, accumulated electricity, accumulated electricity bills, and current. 2. Only Two Function Buttons: Mode and up. The function interface is concise and clear, easy to understand and adjust. There is a reset hole in the middle. If you need to reprogram, just insert a paper clip into this hole. 3. High-resolution Digital Display with Backlight: The backlight can always be [...]
45.75 $ Add to cartDigital LCD Display Blue DC 60V 100A Balance Voltage Battery Power Analyzer Watt Meter Checker Balancer Charger RC Tools Features: 1. The digital LCD screen provides clear digital readings.2. Intermittent treatment up to 100 amps and continuous operation at 50 amps.3. Connect the load to the battery to provide real-time battery charge readings.4. Process 0 to 60 volts. Suitable for 12, 24, 36 and 48 volt battery pack systems.5. Very low power consumption is 7 mA. More efficient than any other instrument.6. Measure energy wh, charge ah, power w, current A and voltage V.7. Accurate and accurate 0.01 A [...]
46.95 $ Add to cartPEAKMETER MS2205 High Accuracy Digital Power Clamp Meter With 0.1 - 1000A Current Measurement Range Features MS2205 Three-phase digital power clamp meter is a handheld aptitude meter with power measurement. 1.The meter can be used for testing power, voltage, current, peak value, phase, frequency, power factor, phase angle, and reaction factor, etc. 2.Of single/ three-phase circuit; automatic phase sequence testing is possible for 3-phase measurement. 3.Low-consumption high-speed single-chip microprocessor is employed and sophisticated algorithm is applied, as a result, result can be obtained rapidly and precisely, and up to 20 harmonies and distortion value thereof can be measured. [...]
286.25 $ Add to cartDigital LCD Display Blue DC 60V 100A Balance Voltage Battery Power Analyzer Watt Meter Checker Balancer Charger RC Tools Features: 1. The digital LCD screen provides clear digital readings. 2. Intermittent treatment up to 100 amps and continuous operation at 50 amps. 3. Connect the load to the battery to provide real-time battery charge readings. 4. Process 0 to 60 volts. Suitable for 12, 24, 36 and 48 volt battery pack systems. 5. Very low power consumption is 7 mA. More efficient than any other instrument. 6. Measure energy wh, charge ah, power [...]
51.41 $ Add to cart200A Watt Meter Power Analyzer Voltage Amp Meter Current Meter Multi-function Measure Power And Energy Consumption Tool Features: • It is the perfect troubleshooting multi-function tool. • Measure power and energy consumption of any battery powered device. • Easy to read LCD screen provides clear number readings, the wattmeter will continuously provide the real-time reading of amperes, volts, and watts after connection. • The device can calculate the voltage, current, power, discharge amount and discharge time of the aircraft, and calculate the force effect of the multi-axis aircraft. Specification: Operates from 4.8-60V 0V with optional auxiliary battery Backlit LCD [...]
54.78 $ Add to cartDescription:Fine Material: The watt meter is of fine ABS plastic made, which is firm, durable and not easy to break.Wide Use: The watt meter can also be used to test many other data like voltage, current and etc.Digital: The watt meter is designed to be digital, which is convenient and easy for us to read data.Useful Tool: The power analyzer can help you to test various electrical device like motor, solar panel and etc.LCD Screen: The watt meter is designed with backlight LCD screen, so we can also easily use the item in the ABS.Color: Shown as Picture.Size: Shown [...]
50.68 $ Add to cartSpecification Frequency range: 80MHz~999MHzVSWR display: 1.00~99.9Maximum power: 120WPower error: <10Continuous sampling: 100 times/secondBurst sampling: The leading edge of the signal triggers sampling, and the burst/continuous sampling is automatically converted.Frequency Compensation: Automatically measure the signal frequency and perform frequency compensation for power conversion.Sleep and wake up: Sleep after 3 minutes without any operation, and can be woken up by radio frequency or manually.Display: 128 X 64 LCD screenKey operation: single key.RF Interface: N-KF 50 ohmsTYPEC interface: USB cable charging, 200mA;Li-ion battery: 95X35X26 mmNet weight of single machine: about 120g Package include RD106P:1 x RD106P SWR meter1 x USB cable1 [...]
149.39 $ Add to cart220/380V 5-80A Energy Consumption Digital Electric Power Meter 3 Phase 4P KWh Meter with LCD Feature: This product adopts transparent shell, which is convenient to observe the operation status of electronic components inside the meter. LCD backlight display is used to read data clearly. The power consumption of the product is very low. The theoretical power consumption is less than or equal to 2 W. The product has stable performance and can run steadily in the range of -20-55 degrees Celsius. Products are widely used in power metering systems. Specification: Model: DTM024 Voltage: 3x220/380V [...]
81.85 $ Add to cartbody { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
56.55 $ Add to cartbody { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
43.83 $ Add to cartProduct Description Belt and Disc Sander 375W & 1420 RPM & Various Sanding This belt disc sander is ideal for stock removal, profiling, handles and finish work, satin or mirror finish. It is constructed of steel that makes this sander solid. The belt can be adjusted from 0-90°, and we also provide a miter gauge for your accurate work. Combined Belt & Disc Sander Various Angles Sanding 375 W High Efficient Motor Durable Steel Construction Key Features Horizontal & Vertical Sanding The 36 x 4/915x100 mm belt platform can be adjusted from 0-90° to accommodate almost any project. A [...]
193.46 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.