For Fiat ECU SCAN MultiECUScan 4/6pcs Adaptor OBD2 Cables Connector Diagnostic Adapter for Engine,ABS,Airbag,CAN,Control Module

Description

Note

:

1.Green Adaptor Lead MultiECUScan / for Fiat EcuScan Adaptor 1 = Engine, ABS, Power Steering
2.Red Adaptor Lead MultiECUScan / for Fiat EcuScan Adaptor 2 = Airbag
3.Yellow Adaptor Lead MultiECUScan / for Fiat EcuScan Adaptor 3 = CAN
4.Purple Adaptor Lead MultiECUScan / for Fiat EcuScan Adaptor 4 = Electric Hood
5.Blue Adaptor LeadMultiECUScan / for Fiat EcuScan Adaptor 5= Control Module
6.Gray Adaptor LeadMultiECUScan / for Fiat EcuScan Adaptor 6= base control module

Pin Configurations:

1.Green Adaptor Lead = Female pin 7 to male pins 1,7,9,12.

2.Red Adaptor Lead = Female pin 7 to male pin 3

3.Yellow Adaptor Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12

4.Purple Adaptor Lead = Female pin 7 to male pins 7,8,11,13

Description

：

1.Green ABS / Power Sreeing adapter lead Adapter 1 on MultiECUScan website
-Designed to allow access to the ABS and Power Steering systems on supported vehicles. This adapter has a green connector on one end for easy identification.
Using this adapter, Pin 7 on the diagnostic tool is connected to Pins 1,7,9 & 12 on the car.

2.Red Airbag adapter lead Adapter 2 on MultiECUScan website
-Designed to allow access to the Airbag system on supported vehicles.
This adapter has a red connector on one end for easy identification.
Using this adapter, Pin 7 on the diagnostic tool is connected to pin 3 only pn the car.

3.Yellow CAN adapter lead Adapter 3 on MultiECUScan website
-Designed to allow access to the low-speed CAN system on supported vehicles.
This adapter has a yellow connector on one end for easy identification.
Using this adapter, Pin 6 & 14 on the diagnostic tool are connected to pins 1 & 9
Respectively on the car, Pin 7 on the diagnostic tool is connected to pin 12 on the car.

4.Purple Electric hood adapter lead Adapter 4 on MultiECUScan website
-Designed to allow access to the electric hood system on supported vehicles.
This adapter has a purple connector on the end for easy identification.
Using this adapter, Pin 7 on the diagnostic tool is connected to pins 7,8,11 & 13 one the car.

5.Blue Control Module Adapter Wire Design allows access to enhanced features on the vehicle eg, multimedia, blind spot sensors, etc.

6.Gray base control module adapter wire designed to allow access to basic functions on the vehicle eg headlights, parking controller, ABS, electric steering, etc.

Supports the following brands vehicles:

for Jeep.
for Chrysler.
for Dodge.
for FIAT.
for LANCIA.