Additional information
Power | 120W |
---|---|
Voltage | DC5 - 12.0V |
Model Number | Heating Board |
Brand Name | meterk |
Origin | Mainland China |
Certification | NONE |
50.01 $
1997 in stock
Power | 120W |
---|---|
Voltage | DC5 - 12.0V |
Model Number | Heating Board |
Brand Name | meterk |
Origin | Mainland China |
Certification | NONE |
This product is a non-tapped mini ZVS finished-board, induction heating, excluding cooling fan. The maximum power is 120W 12.0V induction heating. Push the transformer 12.0V, the primary 10 turns, about 30W. DC5V-12.0V input voltage, this voltage-ranges is working voltage, not the no load voltage of power supplys. The voltage exceeds 12.0V or below 5V, we do not guarantee that it can work normally. Equipped with blue LED indicator light, if the indicator light is weak, means the power supplys is insufficient and you need to replace it with a higher power supplys.
Features:
This is a non-tapped mini ZVS finished-board, induction heating, tesla and Jacob's Ladder driver, cooling fan is not included.
The maximum power is 120W 12.0V induction heating. Push the transformer 12.0V, the primary of 10 turns, about 30W.
DC5V-12.0V input voltage, this voltage-ranges is working voltage, not the no load voltage of power supplys. The voltage exceeds 12.0V or below 5V, it is not guaranteed to work properly.
Make sure that all component parts are soldered correctly, the positive and negative poles of the power cord are not reversely connected, the load is connected, and then power on; do not power on at no-load which makes it easily broken.
The width of the object to be heated should be between 1/3~1/2 of the inner diameter of the heating coil, and the width should not exceed 2/3.
The diameter of the heating object should be controlled within 20mm as much as possible, if the heating object is too large, it will be difficult to heat it into red-hot, due to the limited power.
The current is relatively large during induction heating, the coil heat is also relatively large, usually work for 5 minutes to power off to cooling and please solder the heating coil directly to the printed circuit board during induction heating.
Equipped with blue LED indicator light, if the indicator light is weak, means the power supplys is insufficient and you need to replace it with a higher power supplys. Possible reasons for the indicator light not being on are:
1. the line is not connected properly and the power supply is not energized.
2. there are components on the board that are damaged.
Specifications:
Name: Induction Heating Board
Input voltage: DC5-12.0V
Maximum Power:150W12.0V Inductive Heating
Item size: 55 x 38 x 1.6mm / 2.17 x 1.50 x 0.06in
Package size: 80 x 80 x 30mm / 3.15 x 3.15 x 1.18in
Package weight: 50g / 1.76ounce
Packing List:
1 x Module
1 x Coil
Features: brand new and high qualityFast heat, easy to replace, to prevent leakage.Stainless steel, anti-rust, anti-corrosion, high insulation, high safety performance.We offer 3 kinds you can choose one or more according to your needs.Igniter Hot Rod only, other accessories in pictures are not included. Specifications: Material: Stainless Steel150W Size: approx 6x100mm/0.24x3.94 inches 200W Size: approx 8x100mm/0.31x3.94 inches 300W Size: approx 10x100mm/0.39x3.94 inches Color: Purple/Khaki/Yellow Note: 1.Please allow 1-3cm errors due to manual measurement, make sure that you do not mind before you order. 2.Due to the difference between different monitors, the picture may not reflect the actual color [...]
44.24 $ Add to cartPrimary Secondary Coil Electromagnetic Induction Coil Experiment Instrument for Physics Teaching Feature: 1. Lightweight and portable, the electromagnetic induction spiral coil specializes in electromagnetic induction phenomena, which is convenient to carry and use.2. Easy to use, it can be used with bar magnets, ammeters, sliding varistors and other instruments.3. Physics laboratory equipment auxiliary tools make physics experiment learning more efficient.4. Rugged and durable, constructed of enameled copper, wear resistant, not easy to be damaged, and long service life.5. It is designed to demonstrate electromagnetic induction and verify Lenz's law for students. It is an ideal choice for physics [...]
54.98 $ Add to cartFeatures: ZVS induction heating board kit can be used by DIY players for hardening, annealing and other heat treatments of small parts.It can be used with graphite crucible not included to smelt gold, silver, copper, aluminum and other metals, heating quickly and evenly.High-quality PCB board heating module, with nice durability, stable performance, wear-resistant and circuit adopts 12-48V low-voltage direct current power supplys, maximum current 20A, maximum power 1000W.The higher the voltage, the greater the heating current, the effect is better and the heat is greater, choose the right voltage according to the actual Material: PCB + MetalWorking Voltage: [...]
72.10 $ Add to cart1000W Magnetic Induction Heater Kit, Flameless Heating Technology, With 8 Coils And Aluminum Alloy Box, Used For Heating Nuts, Gears, Bearings 【Magnetic Induction Heating】 With the application of magnetic induction technology, there is no open fire, and other parts will not be damaged in the heating process, so it has excellent performance. 【Intimate Design】 The LED light on the top of the product allows you to operate normally in the dark, and the anti-skid grip makes you operate more comfortable. 【Safety And Convenience】 It is unwise to use open fire to heat the nut, which not only can [...]
366.84 $ Add to cartFeatures : 【Magnetic Induction Heating】: With the application of magnetic induction technology, there is no open fire, and other parts will not be damaged in the heating process, so it has excellent Design】: The LED light on the top of the product allows you to operate normally in the dark, and the anti-skid grip makes you operate more And Convenience】: It is unwise to use open fire to heat the nut, which not only can not achieve the effect, but also is very dangerous. This machine has no open fire in the work, and is heated evenly [...]
361.41 $ Add to cartProfessional Cycling Pants The Quality of Pants Decide For Your Comfort Fabric Material : High Elastic Soft,Fitting Shin,Multi-Comfort X-Tiger GEL PAD 5D Coolmax Gel Pad Quick-Dry Function Make You Feel More Comfortable Professional cycling shorts New design, high-elasticity Lycra shorts For maximum comfort White, lightweight, mesh material The back has adopted lightweight mesh material which has superior breathability and can avoid stuffiness of the back Lightweight design can reduce the load of shoulder and remit cycling pressure Pants quality sewing techniques Gel Pad have advanced craft sewing Pants Skid strip with details Exquisite stitching trousers with high quality [...]
70.66 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.