Additional information
Certification | CE / EU |
---|---|
Feature | Stocked |
Type | Kitchen Lighters |
Origin | Mainland China |
Model Number | Quick - loading alcohol base oil and oil linkage frying stove controller |
Material | Plastic |
Plastic Type | Melamine |
171.25 $
50 in stock
Certification | CE / EU |
---|---|
Feature | Stocked |
Type | Kitchen Lighters |
Origin | Mainland China |
Model Number | Quick - loading alcohol base oil and oil linkage frying stove controller |
Material | Plastic |
Plastic Type | Melamine |
Commercial stove flameout safety protection ignition controller function description
The controller is used in commercial stoves with fan control, which can realize automatic high-energy ignition, fan cleaning and accidental flameout protection functions, and meet the automatic control and safety protection of modern kitchen stoves. Controller related connection: 1. The power cable is connected to 220V AC power.
2. Two ignition high-voltage lines are connected with double-needle with line ignition needle for relative ignition, or one ignition high-voltage line is connected to the ignition needle and another ignition high-voltage line is connected to the burner. The ignition forms an ignition circuit for the ignition of the burner, and the inspection fire line is connected to the fire detector for the flame. Detection.
3. The start line is connected to a non-self-locking button press and hold, release, not locked to start or stop working.
4. Two solenoid valve wires are respectively connected with a 24V double-valve one-piece solenoid valve. One of the solenoid valves controls the long open flame and the other solenoid valve controls the main fire.
5, the wind line machine is connected to the 220V fan.
6, the ground wire is connected to the hob. Undefined Ignition controller working process:
1. The controller is powered on, the system enters the standby state, and waits for startup at any time.
2. Press the “Start and Stop Button”, the system “嘀” will start, the fan will immediately rotate to perform the pre-sweeping operation to prevent the residual gas in the furnace from deflagrating. After 4 seconds, the ignition controller will start to ignite and open the long-light valve. Ignite the fire, after the fire detector detects the flame, open the main fire solenoid valve to ignite the main fire, enter the normal combustion state, and then monitor the long flame flame at any time. Once the accidental flameout occurs, the fire detector will not detect the flame, and the ignition controller will ignite again. During the ignition again, the fire needle is still not detected, and the ignition controller will immediately close both solenoid valves and sound an alarm.
3. Press “Start and Stop Button” during normal operation to stop working, close the valve and return to standby. Alarm sound meaning:
1. A periodic sound: pseudo-fire failure. That is, when there is a fire signal detected at the start, the solenoid valve has not been opened yet, and there should be no flame. At this time, there is a pseudo-fire fault, and it is necessary to check whether there is a problem with the fire line and the fire needle.
2. Two beeps periodically: Ignition failed fault. Ignition failed for 8 seconds without ignition. At this time, check whether the ignition pin discharge is normal, the solenoid valve is open, and the gas is interrupted.
3. Three rings periodically: Unexpected flameout failure. That is, the flame is unexpectedly extinguished during normal operation. In this case, check if the gas is interrupted. Shut down or exit the alarm:
During normal operation or fault alarm, if you press the “start and stop button” again, the work or alarm will be ended, that is, the valve will be closed, the buzzer will be turned off, and the standby state will be returned.
Y1 commercial stove flameout safety protection controller basic parameters 1, product model: Y1. 2, working voltage range: AC175-245V 3, service life: ≥100,000 times
4, ignition intensity: high-energy ignition, can ignite flammable gas and various alcohol-based biofuels.
5, there is an accidental flameout safety protection function, when the accidental flameout, the solenoid valve is closed and an alarm sounds.
6, synchronous control of the fan, cleaning before ignition to prevent residual gas in the furnace deflagration.
7, the whole resin is potted with epoxy resin, waterproof and moisture proof, and the igniter shell is made of high temperature flame retardant material.
Commercial stove high energy igniter ignition effect diagram P1050386_ copy
Commercial stove high energy igniter lead wire connection description
The company strongly recommends that the customer use the dual ignition for the ignition needle. This kind of ignition effect is better. If the double needle can only be used with a single needle because of the burner, one of the high voltage output leads 800mm is connected to the ceramic ignition needle. Another high-voltage output lead 800mm must be fixed on the burner with screws. The distance between the ignition needle and the metal of the burner is 5-6mm. The ignition is discharged against the burner to form an ignition circuit. Note that it is not on the stove, it is not attached to the hob. If it is connected to the hob, the ignition circuit is very long. Moreover, the hob and the burner are not necessarily connected, so the ignition is cut off. In the loop, the igniter only uses half the power. Maybe you can hardly understand the truth at the same time. Maybe you will say that I have been connected in this way. It is very good. You can understand it as soon as you try it. Therefore, the output voltage of the ignition controller produced by our company is double long line. For a length of 800mm, refer to the igniter connection diagram below. Also, the ground connection on the controller is also very important, and it is required to be firmly grounded. This way the controller is more resistant to interference. IMG_4181_copy
The company currently has the following models of commercial stove extinguishing controllers, which customers can choose according to requirements or require customization.
1; Y1-extinguish safety protection ignition controller: control a 24V gas double valve solenoid valve, this stove must have a long open flame, one of which controls the long open flame, the other is to control the main fire, the controller monitors the flame of the long open flame, If the flame is unexpectedly turned off, the solenoid valve is turned off to sound an alarm, and the fan is controlled synchronously. Before the ignition, the furnace is cleaned to prevent deflagration, and the cleaning time is 4 seconds.
2; Y2-extinguish safety protection ignition controller: control a 24V gas solenoid valve.
3; Y3-extinguishing safety protection controller: control a 24V gas double valve solenoid valve, this stove must have a long open flame, one of which controls the long open flame, the other is to control the main fire, the controller monitors the flame of the long open flame, such as In case of accidental flameout, the solenoid valve is closed and an alarm sounds.
4; Q1B-extinguish safety protection controller: control a 24V gas solenoid valve, synchronously control and monitor the fan, clean the furnace before ignition to prevent deflagration, cleaning time is 4 seconds
DY2 basic parameters The DY2 high-energy igniter developed by the company is AC220V igniter. The shape of the spark is a flame, which is like an open flame. The ignition energy is strong, the performance is stable and reliable, and the ignition efficiency is high. It is widely used in commercial energy-saving stoves, boilers, burners, steamers, ovens and other commercial equipments that use gas and methanol as fuel. 1, product model: DY2. 2, the main function: delayed high-energy ignition, low-voltage jog switch start. 3, working voltage range: AC175V-245. 4, the service life: ≥ 100,000 times. 5, ignition intensity: high-energy ignition, [...]
75.00 $ Add to cartDQ8 basic parameters The DQ8 high-energy igniter developed by the company is AC220V igniter, with strong ignition capability, stable and reliable performance and high ignition efficiency. It is widely used in commercial energy-saving stoves, boilers, burners, steamers, ovens and other commercial equipments that use gas and methanol as fuel. 1, product model: DQ8. 2, the main function: delay super ignition, low-voltage switch start. 3, working voltage range: AC175V-245. 4, the service life: ≥ 100,000 times. 5, ignition intensity: super ignition, can ignite flammable gas and various alcohol-based biofuels. 6, ignition high pressure: ≥ 15Kv. 7, delay to stop the ignition [...]
78.75 $ Add to cartBasic parameters of DQ8B commercial stove super igniter The DQ8B super igniter developed and produced by our company is an AC220V igniter, which can ignite cigarettes within 1 second, with stable and reliable performance and high ignition efficiency. Widely used in commercial equipment such as hotel energy-saving stoves, boilers, burners, steam cabinets, ovens, etc. fueled by diesel, gasoline, alcohol, biofuels, and various industrial oils. Since it was launched on the market in 2010, it has been widely loved by customers, and now customers are all over the Pearl River Delta and the whole country. 1. Product model: DQ8B. 2. Main [...]
83.75 $ Add to cartFirst, the methanol no fan electric furnace head intelligent controller detailed description The controller is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition, electromagnetic pump speed regulation, etc., it can also expand external precision regulator to achieve precise adjustment of oil pump flow and Start-stop control, this function and gear position adjustment achieve the effect of no need to switch, fire with heart, start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear [...]
92.50 $ Add to cartZQ1 alcohol based fuel steam controller system description First, the configuration: 220V electromagnetic pump; 220V fan; super ignition; start button compatible switch; wind pressure switch; lower water level probe; ignition needle; fire needle; status indicator. Second, the applicable products: Alcohol based fuel steam generator Third, the work process: When the start button is turned on, the fan runs immediately. When the wind pressure switch is turned on, the ignition starts and the 220V electromagnetic pump is started, and the alcohol-based fuel is sprayed. When the fire detector detects the flame controller, the ignition is stopped, and the system enters the [...]
96.25 $ Add to cartDomestic LME11. 330C2 Domestic LME11. 330C2BT Original LME11. 330C2 Original LME11. 330C2BT LME11. 330C2 combustion controller is used for intermittent operation of single stage small capacity up to 350KW gas burners. LME... is used for monitoring and control of single-stage or double-stage gas burners during start-up and intermittent operation. Flame monitoring is through ionizing rod or flame detector QRA and auxiliary equipment AGQ3 or using blue flame detector QRC. According to the size and specifications of the enclosure, LME... is the same combustion controller as LGB and LMG refer to «Model Overview» Convenient remote reset, multiple colors, display error status [...]
126.25 $ Add to cartGN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the [...]
358.75 $ Add to cartFunction description of alcohol-based fuel vaporization controller for precise regulation of firepower The controller is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition, electromagnetic pump speed regulation, etc., it can also expand external precision regulator to achieve precise adjustment of oil pump flow and Start-stop control, this function and gear position adjustment achieve the effect of no need to switch, fire with heart, start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear [...]
502.50 $ Add to cartGN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the [...]
402.50 $ Add to cartInfrared beam debugging: a. The receiving head with a glass window at the side end of the aluminum infrared component has a built-in infrared receiving element and a status indicator. The light is always on to indicate that the correct infrared signal is received, indicating that the infrared light is not blocked, and the direction of emission and reception is basic Normal, in the effective range. On the contrary, the flashing light indicates that no infrared signal is received, indicating that the infrared light is blocked or emitted by the pot, and the receiving direction is not within the effective [...]
83.75 $ Add to cartMetal Outdoor Barbecue Charcoal Gas Cooker Lighter Device for Outdoor Camping Drop Shipping Item Specification: Features: Adjustable: Adjustable flame switch on the lighter, anti-skipping. Material: Made of aluminum durable and wear resistance.Portable: Small to carry and storage.Refillable: Refillable butane function for long service life. There is a small hole at the bottom for refilling.Widely Use: Suitable for outdoor color may be slightly different from the image due to different monitor and light effectPlease allow 1-3cm deviation due to manual measurement Specification: Package Includes: 1x Barbecue LighterNo [...]
body, td, th { font-family: Verdana, Geneva, sans-serif; font-size: 18px; color: #636363; } body { margin-left: 0px; margin-top: 0px; margin-right: 0px; margin-bottom: 0px; } a { color: #636363; text-decoration: none; } a:hover { text-decoration: none; color: #636363; } a:active { text-decoration: none; color: #636363; } em { color: #BD1A1D; font-style: normal; font-weight: 700; } Electric Arc Lighter USB Rechargeable Flameless Windproof Flexible Candle Lighters for BBQ Stovetop SCVD889 Features: Type:Electric Arc Lighter Material:Aluminum Alloy Fire mode:Arc Description: 1.Rechargeable Battery:Arc lighters are powered by rechargeable Lithium-Ion 220mAh batteries that can be recharged [...]
Y2 commercial gas stove flameout safety protection ignition controller function description This controller is used on commercial stoves, can realize automatic high-energy ignition, accidental flameout protection, and meet the automatic control and safety protection of modern kitchen stoves. 1. Basic parameters of Y2 commercial stove flameout safety protection controller 1. Product model: Y2. 2. Operating voltage range: AC175-245V 3. Service life: ≥100,000 times 4. Ignition intensity: high-energy ignition, which can easily ignite combustible gas and various alcohol-based biofuels. 5. There is a safety protection function for accidental flameout. When the flameout is accidentally closed, the solenoid valve will be turned [...]
146.25 $ Add to cartCommercial stove flameout safety protection ignition controller function description The controller is used in commercial stoves with fan control, which can realize automatic high-energy ignition, fan cleaning and accidental flameout protection functions, and meet the automatic control and safety protection of modern kitchen stoves. Controller related connection: 1. The power cable is connected to 220V AC power. 2. Two ignition high-voltage lines are connected with double-needle with line ignition needle for relative ignition, or one ignition high-voltage line is connected to the ignition needle and another ignition high-voltage line is connected to the burner. The ignition forms an ignition circuit [...]
171.25 $ Add to cartFeatures: brand new and high quality Multi-function: It can meet almost all your needs for barbecue and barbecue, welding, crafts and pastries. It is definitely an ideal choice for picnics, hiking, camping or other outdoor activities. Easy to operate: just insert the cylinder connector into the gas bottle, press it lightly, and then turn it clockwise until it locks in place. Turn the flame adjustment knob to release the gas and press the ignition button to get a stable flame. High quality: It is made of high-quality stainless steel tube and plastic material, which can withstand high temperatures and is [...]
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.