Additional information
Power | 1800W / 2500W |
---|---|
Voltage | 12V - 48V |
Model Number | High power ZVS induction heating plate |
Brand Name | Aideepen |
Origin | Mainland China |
Certification | NONE |
Type | High Power ZVS Induction Heater PCB Board Module |
120.94 $
14249 in stock
Power | 1800W / 2500W |
---|---|
Voltage | 12V - 48V |
Model Number | High power ZVS induction heating plate |
Brand Name | Aideepen |
Origin | Mainland China |
Certification | NONE |
Type | High Power ZVS Induction Heater PCB Board Module |
1800W 2500W ZVS Induction Heater Induction Heating Machine PCB Board Module Flyback Driver Heater Cooling Fan Interface+ Coil
Item Name: 1800W or 2500W High Power ZVS Induction Heating Board Module Flyback Driver Heater+Tesla Coil+Dual fan
Model:A52357
Product Description
Material: metal + plastic
Color: Black
Input voltage: 12V-48 recommended above 36V
Power requirements: less than 12V ≥ 10A 15V or more ≥ 20A
Maximum power: 2500W
Maximum current: 50A
Size: 25x12x9cm Manual measurement, error about 3mm, please understand
Features:
●The heating plate is made of military-grade PCB, and the performance is stable;
●The power line is fully covered with copper cover design, which can increase the current and heat generation;
●Using oversized and large power heat sink to dissipate heat better;
●The output terminal uses three M4 copper columns in parallel, which can be connected to other outputs such as high voltage package;
●Using six IRFP260 and 12 capacitors in parallel resonance, the power is high and the efficiency is high;
Buyers must see / pay special attention
Note:
The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. The buyer can prepare water cooling system separately, can buy a small water pump and 2 meters of inner diameter Of 4mm rubber hose.
2. You must pay attention to when using switch power supply, because the high-power switching power supply usually have soft start function, the same output voltage is slowly rising, and if the voltage rise to 10V before By lacking voltage lead to circuit can't afford to vibrate, so that the two MOS tube conduction and burned components at the same time, so be sure to switch the power supply voltage stability and then access the induction heating circuit.
3. When heating the metal objects do not to heat too large metal, otherwise it may be overloaded with power, please add a 35A fuse or ammeter and air switch will be better. package does not inclues
4. Although this drive plate can withstand more than 40A current, but it is recommended that not exceed 48V 35A to prevent accidents and damage.
5. Package comes with heating circle diameter is 60 mm, design voltage is 36V, if you use more than 40 voltage power supply shall be used for inner diameter 70 mm above diameter heating ring, water pump use 12V dc power supply, please use separate Power supply voltage regulator module to burn out fan and water pump.
6. The minimum input voltage of the module is 12V, it doesn't mean all the 12V power supply can be used, some novice buyers may use a smaller power supply. This module has specific voltage and current requirements, the voltage 12V current must Be more than 10A power supply can be used, if the power is too low will lead to the power output is greatly reduced, when the voltage is lower than 12V, it will lead to two MOS at the same time conduction, will burn MOS tube
7. If you find that the MOS tube fever, then the first thing to consider whether the power output meets the requirements.
8. Do not empty the board, otherwise it will issue a very high frequency of noise, and then MOS tube will burn out.
9. Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small heating almost no response, and 12V power supply easily lead to the power supply output voltage decreases, below 12V is very dangerous
10. Induction heating power is great, so fever is normal, be sure to do a good job of cooling.Induction heating, the power recommended more than 48V 50A switching power supply. More than 24V power supply, then more than 20A power supply, the greater the voltage, the greater the current, the greater the heating power, heating faster.
Application: high frequency induction heating plate
How to use? Instructions
For induction heating, it is recommended to use a switching power supply of 48V50A or higher. If the power supply is 24V or more, a power supply of 20A or more is required. The higher the voltage, the larger the current, the higher the heating power, the faster the heating speed.
Package include:
● 1 x PCB board with dual fans
● 1 x copper tube
Soft Microplush Neck and Shoulder Wrap Heating Pad Electric Auto Shut Off Body Warmer Back Pain Relief 63 x 42CM 220V 100W EU Plug Specification: Brand: Joyplus Material: Soft microplush Size: 63 x 42CM Color: Gray Power: 100W Voltage: 220-240V Features: 1 The electric blanket controller has 3 settings to meet different requirments. When the temperature changed, the light will bright on hight-medium-low, even at night. 2 The removable cables with detachable connector can be easy attached with the electric blanket, so that you can washable this item more easily. 3 The overheating protection of Full size double side fabric [...]
77.01 $ Add to cartInput Voltage V 220/110V 50/60HZ 1000 W 4.5/9.0 A 18V/50A Reliable Technology and High Quality Components The accessories coil Using manual+ Carry Case+ Coils inductor as following sizes Dia 30mm Coil 2 pieces Dia 40mm Coil 2 pieces Dia 50mm Coil 2 pieces 2 pieces 2 pieces South of Korea, Poland, Unitd States, Canada, Moscow of Russia overseas warehouse provide. offer maybe different, you can buy from local warehouse for shorter time. If you need urgently shipping from South of Korea. you can place order though this [...]
351.99 $ Add to carthigh quality 240x60mm 600W Infrared bottom ceramic heating plate for BGA rework station Introduction Power: 600W 220/230V 450W 110/130V ceramic plate size: 240 x 60mm Suitable BGA rework station soldering machine Packing include: 1pcs x 240x60mm 600W Infrared ceramic heating plate(220V) 2pcs x 240x60mm 600W Infrared ceramic heating plate(220V) 4pcs x 240x60mm 600W Infrared ceramic heating plate(220V) 4pcs x 240x60mm 450W Infrared ceramic heating plate(110V) We will send according [...]
57.16 $ Add to cartFeatures: 100 brand new and high quality Specification: Purpose: Used in RDA/RDTA Material: Ni80 Product specification: 24GA 26GA 28GA Packaging Size: 6.8cm x 5cm x 2.5cm Package includes:100pcs / box Note: Please allow1-2cm measuring deviation due to manual measurement. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! [...]
46.46 $ Add to cartFeatures: - PTC ceramic element, quickly and easily heating, keeping you warm in the cold winter. - Built-in timer function1-12 hours, perfect for preheating the rooms. - Support 15℃~32℃ temperature setting. - Automatically power off when reaching the temperature set to avoid accidents, safe and reliable. - With 2 speeds, easy to adjust it based on your actual needs. - Comes with a remote control for conveniently controlling. - Easy to use, suitable for using at home or in the office. Specifications: Material: Plastic Plug: EU, US, UK Optional Power: 500W Temperature Setting: 15℃~32℃ Note: Please [...]
58.59 $ Add to cartThis heating module can heat up small things, and the object width should be within 1/3-1/2 coil diameter.Easy to use: This flyback driver heater module can provide 120W power and the input voltage is from 5 to 12V.Simple installation: This induction heating module comes with an ignition coil that can be soldered on the board.Long-lasting: This heater board is made of plastic and metal and is durable and not easy to be damaged.Replacing part: This induction heating module is a good choice to replace a worn or damaged module that you Plastic.Input voltage: 5-12V.SizeLxWxH: Approx. inch.Coil length: [...]
48.53 $ Add to cartFeatures: ZVS induction heating board kit can be used by DIY players for hardening, annealing and other heat treatments of small parts. It can be used with graphite crucible not included to smelt gold, silver, copper, aluminum and other metals, heating quickly and evenly. High-quality PCB board heating module, with nice durability, stable performance, wear-resistant and corrosion-resistant. Heating circuit adopts 12-48V low-voltage direct current power supplys, maximum current 20A, maximum power 1000W. The higher the voltage, the greater the heating current, the effect is better and the heat is greater, choose the right voltage according to the actual [...]
65.43 $ Add to cartDescription: 1. Made of 1.6MM double-sided fiberglass board. 2. Using factory-designed large inductors, the parameters are consistent and the performance is more stable. 3. All resistors use five-ring tight resistors five-ring resistors have small error and work more stable. 4. The current at the bottom of the board is mostly filled with tin can be used for induction heating. 5. Generally, it is powered by 12-30V DC power supply. The current needs to be more than 10A. Because the driver board is working in Zero Voltage Switching, his efficiency is the highest. Specifications: Name: Induction board Material:plastic, copper Voltage: [...]
54.56 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.